How to clean the speakers of my phone?

No matter how meticulous you think you are with your cleaning routine for your smartphoneover time the speakers will slowly fill with dust, dirt and other debris to the point that you will wonder how to clean my speakers phone?

Please enable JavaScript

It is crucial to note that the horns remain in that state, as this can result in distorted and muffled sound when playing movies, songs, or phone calls.

However, before going to a Repair workshopthere are some techniques you can use to clean your speakers from the outside and inside of the phone. In One zerowe provide you with a detailed guide on how to properly clean the speakers of your mobile.

The first step is to get a soft-bristled brush that allows you to gently brush the speaker grills of your phone. It is recommended to use the brush at an angle that avoids pushing dirt into the grate and instead performs a soft brushing.

Another option is to use a cotton swab to gently rub the outside of your smartphone’s speakers. With circular movements and applying light pressure, you can move the hyssop over the speaker holes to clean them.

Proceed with this procedure until all the dirt has been removed. In case the holes of the speakers are wide enough, lightly press the Q-tip on them. Don’t apply too much force, just enough to get the cotton tip into the groove. Once inside, rub the hyssop from left to right applying a slight pressure.

For best results, add a small amount of isopropyl alcohol to your cotton swab. It is essential that the amount is kept to a minimum, since although isopropyl alcohol evaporates faster than water, too much could damage the interior of your car. phone.

As the next step in the cleaning process, it is suggested to consider purchasing a cleaning putty special. It is essential that this putty be highly sticky so it doesn’t displace the dirt, but instead catches and removes it as the caulk is removed.

These helpful devices don’t offer as much pressure as compressed air and are safe to use on your phone. Consider using an air blower after you have used the soft bristle brush; it will help remove any debris that the brush has dislodged. He Pixel RB-20 It’s made of durable rubber for a strong blast of air and offers a comfortable, ergonomic grip.

This step is only for those who know the basic structure of their phone and they have the utensils to carry out this procedure. If this is not the case, it is better to take it with a technician, since you could damage the internal components of your device or its cover.

That said, remove the back cover of your mobile with a suction cup and a spudger. Heat the perimeter of your phone for about 15 seconds with a hair dryer on low heat. Then, apply a suction cup on the back.

With the screen facing down, gently pull the suction handle toward you. At the same time, insert the flat end of a spudger enter the perimeter opening and pry towards you.

keep doing lever on the tailpiecewhile continuing to pull on the suction cup, until it comes off.

If you’re having trouble, apply more heat around the perimeter to loosen the glue holding the two pieces of the phone instead.

with models of older phones, you can pry with your hands. Keep in mind that, for smartphones newer glass-backed ones, this is not possible.

Do not forget to subscribe to our networks and News Letter